risers

Tips, Tricks, Mods, Maintenance questions and answers go on this board.

Moderators: joeracket, Bam Bam, RoadWarrior, mr.biker, Cat

Post Reply
canadian driller
Posts: 44
Joined: Mon Mar 21, 2011 9:45 am
Location: Cranbrook

risers

Post by canadian driller » Thu May 07, 2015 10:27 pm

Sorry to ask this again, but I'm having issues with risers. I've tried a set that were supposed to fit but hit the odometer case on the front of the tank. If anybody out there has a 2007 1800T with risers can you give me info on brand/model. I've been all over the bike shops but their books dont give the T option. The r/c/s ones won't work. And the internet hasn't helped much either. I'd hate to order ones online and and have to deal with refunds.

Thx everyone
Image

User avatar
joeracket
Site Admin
Posts: 12595
Joined: Thu Aug 14, 2003 11:36 am
Location: chilliwack, b.c.

Re: risers

Post by joeracket » Fri May 08, 2015 9:49 am

:think: :think: :think: .......... was wondering why the front end on the touring model would be different from the R & S ........... check the cruiser customizing link ......... risers for the T model ....... will give you an idea what you require if wish to purchase locally .......... :) :) :)


http://www.cruisercustomizing.com/ccSea ... %2FRisers"
Image IF YOU DON'T STAND BEHIND OUR TROOPS & LEOS - FEEL FREE TO STAND IN FRONT OF THEM !!! Image

Image

User avatar
VTX-Al
Posts: 1400
Joined: Wed Jul 20, 2005 10:13 pm
Location: Maple Ridge, BC
Contact:

Re: risers

Post by VTX-Al » Fri May 08, 2015 9:52 am

Look for a stock pair off an 1800 C model (any year) - provide a nice rise and set-back and bolt right on.

...VTX-Al
When you come to a fork in the road - take it !!!

canadian driller
Posts: 44
Joined: Mon Mar 21, 2011 9:45 am
Location: Cranbrook

Re: risers

Post by canadian driller » Fri May 08, 2015 11:26 am

The set I tried were 4" with 1 1/2" pullback, the clamp would hit the front of the speedo case on the tank when the bars were turned all the way. I think because the stock bars on the r/s/c are quite different then the stock t. Yes I was looking at the stock c risers on the computer at the dealer yesterday and was wondering if that would work.
Image

User avatar
Chumbly
Posts: 4841
Joined: Wed Jul 14, 2004 1:58 am
Location: Abbotsford, B.C.

Re: risers

Post by Chumbly » Sun May 10, 2015 6:36 pm

:think: Ya, I used the "C" risers with the "R" bars...that worked nicely. Now I've raked the front end 6 degrees over...speedo hits the tank...had to "shave" it some. :doh: :anxious:
Image

Image
Still alive and Free....riding on three
'02 1800C "triked"

User avatar
RoadWarrior
site maintenance
Posts: 1830
Joined: Thu May 12, 2011 4:10 pm
Location: Wooda-bridga, Ontario

Re: risers

Post by RoadWarrior » Fri May 15, 2015 9:32 am

:stupid:

I have an 2008 1800T and installed risers from a "C" model, no issues. Brake lines a little tight though!
---
Common sense is NOT common...

Image

canadian driller
Posts: 44
Joined: Mon Mar 21, 2011 9:45 am
Location: Cranbrook

Re: risers

Post by canadian driller » Fri May 15, 2015 9:41 pm

RoadWarrior wrote::stupid:

I have an 2008 1800T and installed risers from a "C" model, no issues. Brake lines a little tight though!
Awesome, thanks. Now just to find a set....
Image

User avatar
Chumbly
Posts: 4841
Joined: Wed Jul 14, 2004 1:58 am
Location: Abbotsford, B.C.

Re: risers

Post by Chumbly » Tue May 19, 2015 12:29 am

:think: Phone Barnett...they'll make you up a set. :wink:
Image

Image
Still alive and Free....riding on three
'02 1800C "triked"

User avatar
McJeep
Posts: 3438
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: risers

Post by McJeep » Fri May 29, 2015 11:13 am

*might* have a pair - will look - if ya don't hear back from me message me a reminder
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
Chumbly
Posts: 4841
Joined: Wed Jul 14, 2004 1:58 am
Location: Abbotsford, B.C.

Re: risers

Post by Chumbly » Wed Jun 24, 2015 8:52 pm

HDL had a sale on Rivco risers, too. :think:
Image

Image
Still alive and Free....riding on three
'02 1800C "triked"

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 4 guests