clutch replacement

Tips, Tricks, Mods, Maintenance questions and answers go on this board.

Moderators: joeracket, Bam Bam, RoadWarrior, mr.biker, Cat

User avatar
Bam Bam
Posts: 3156
Joined: Wed Aug 13, 2003 1:00 am
Location: Steelhead, Mission, B.C.
Contact:

Re: clutch replacement

Post by Bam Bam » Fri Jul 17, 2015 5:49 pm

McJeep wrote:Bammer! Did you use the complete Barnett setup or mix and match springs etc when ya did the job?
hey Rob, used the complete Barnett setup, comes with new springs. :) just a note, the Barnett has way more contact than the stock clutch plates, and heavier springs too.

User avatar
McJeep
Posts: 3421
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: clutch replacement

Post by McJeep » Sun Aug 09, 2015 12:24 pm

:cheers:
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
Cat
Posts: 7234
Joined: Mon Jul 19, 2004 3:16 pm
Location: Brampton, Ontario

Re: clutch replacement

Post by Cat » Mon Aug 10, 2015 6:29 pm

Any input regarding clutch for 1300?
'Cause I know y'all burnin' out 1800 clutches.
Us little guys like t' know what our options might be.
And never mind the "add 500cc" input. :razz: :) :lol:
It's NOT about the destination........ The Journey is what counts. :cool:
and,
If the Sun is at your back, and the wind is your creation... It's a good day. :)
Image Image
Image
Need Amsoil for yer ride? Contact me.
:dance: :cheers::think:
Bauline East, Newfoundland!!!!!! DONE like a bottle of Schreech at a newfie campfire
MISSED VICTORIA :cry:
Clic here for map of ....
:think: :think: :think: :think: :think: :think::think:
Hmmm, over 103,000 km on my '04 1300C :think:
Left on a journey with my girlfriend, came home with my wife :think: :lol:
Hint: clic on the blue text :wink:

Weather forecasts

Cat's Journey
- Visit my blog page - Cat's Lair
clic on the WWW button below

User avatar
hammerman
Posts: 6073
Joined: Sun Aug 08, 2004 2:46 pm
Location: Trenton Ont.

Re: clutch replacement

Post by hammerman » Mon Aug 10, 2015 7:10 pm

Boone`s runnin a 1300 also. Check with him :think:

User avatar
Boone
Posts: 2898
Joined: Fri Sep 16, 2011 11:08 am
Location: Bowmanville

Re: clutch replacement

Post by Boone » Tue Aug 11, 2015 9:54 am

I replaced mine with a Barnett. Working really well.
Bought a kit on Ebay (plates and springs) for I think $165 bucks. :think: That included shipping.
Bought new bolts for torqueing the plates from the local stealer. I'm pretty sure I had to pull the pipes off also, so you'll need crush gaskets.
The clutch here was around $300. I came in under that for everything. Ship by mail from the U.S. - No tax.. :wink:
Aways put your brain in gear before you let the clutch out on your mouth.

Ironhorse17
Posts: 477
Joined: Fri Jul 25, 2008 7:18 am
Location: Gatineau QC

Re: clutch replacement

Post by Ironhorse17 » Tue Aug 11, 2015 12:32 pm

I got the Barnett Kevlar kit, I kept the dimple metal plates from the original clutch, they had no warpage or discoloration.

The one's with the kit look cheap just stamped metal plates.

Never had a problem slipping or sticking when cold.
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest